Course Outline

Servicing the GE Innova Digital Cath Lab Family: Innova 2100/3100/4100

Overview

The GE Innova Digital Cath Lab Family course is a skills development course designed to provide the experienced service professional with the skills necessary to fully service and calibrate this single/dual detector cath lab system. The 2100/3100/4100 system is built around the JEDI generator. The Innova 2100, Innova 3100, and Innova 4100 will be covered in this course.

Note: The Innova 2121 and 3131 are dual C-Arm (BiPlane) versions of the Innova 2100 and 3100.

Prerequisites

To attend this course, the service professional must have completed RSTI’s Phases I-III or equivalent experience is required.

Objectives

  • Describe the GE Innova cath lab system components
  • Describe the function of the basic components of the GE Innova digital cath lab
  • Demonstrate an understanding of the installation procedures associated with the GE Innova Cath lab
  • Perform the necessary digital performance monitoring and quality assurance procedures
  • Perform all system calibrations and adjustments to maintain the highest quality images
  • Evaluate circuit functions to facilitate troubleshooting
  • Perform a complete and thorough preventive maintenance inspection on the unit

Tuition: $8995

Course Length: 2 Weeks

CEU's Awarded: 8 CEU’s

Dates:

  • Jun 13-24, 2022
Register Course Schedule   Course Outline  
Need parts?

RSTI eXchange is your multi-manufacturer, multi-modality solution for diagnostic imaging replacement parts.
Request Parts

Course Outline

Day 1
  • Digital cath lab overview
  • Digital imaging process overview
  • Innova Family system overview
    • Compare & Contrast systems
  • Major system components
    • LC Positioner
    • 21/31/41cm Detector
    • C1 Cabinet
    • C2 Cabinet
    • Table
      • Omega table
      • Elegance table
    • Smart box
    • TSSC
    • Chillers
      • Tube chiller
      • Detector chiller
    • User interface
  • Innova System evolution
  • System logins and passwords
Day 2
  • Documentation
  • System terms & acronyms
  • Required tools & test equipment
  • System specifications
  • Innova system operation
  • Lab Activities
    • Basic system operation
    • DL system software
    • Image acquisition
    • Image viewer
    • Software navigation
Day 3
  • Operations
    • DL – Digital Leader
    • Revolution Detector
    • Innova system
    • Innova digital
    • Positioner
    • Alarm systems
    • QAP – Quality Assurance Procedure
    • Advantage Workstation
  • Lab Activities:
    • DL operation
    • QAP
    • Advantage Workstation
Day 4
  • Removal of covers & panels
  • Component Identification
  • Lab Activities:
    • Covers & panels
      • DL
      • AW
      • Table
      • LC
      • JEDI generator
    • Component Identification
    • Schematic location
    • Physical location
    • Connector locations
    • Fuse location/identification
Day 5
  • Site planning and installation
  • Network configuration
    • Ethernet config
    • ArcNet Bus
    • CAN Network
    • Troubleshooting Innova internal Networks
  • Service
  • Lab Activities
    • Mechanical alignments
    • Setups
    • Software configuration
    • Network Configuration
    • Configure and test output devices Output devices
      • PACS
      • Laser printer
      • RWS
      • Media
    • Configure and test input devices
      • Modality worklist
Day 6
  • Lab Activities:
    • Calibrations
      • DL
      • AW
      • Table
      • LC
      • JEDI generator
      • KVM
      • Monitors
      • Dosimeter
      • Detector
      • Collimator
    • Functional checks
  • System backups
  • System restore
  • Lab Activities
    • Full system calibration
    • System backups
    • System restore
Day 7
  • Lab Activities
    • Full system calibration (Cont’d)
      • DL
      • AW
      • Table
      • LC
      • JEDI generator
  • Functional Checks (Cont’d)
      • DL
      • AW
      • Table
      • LC
      • JEDI generator
Day 8
  • Preventive maintenance
    • Positioner
    • Table
    • Cabinet
    • Conditioners
      • Tube chiller
      • Detector chiller
    • Tube
    • Collimator
    • Dose
    • Power distribution
    • UPS
  • System service procedures
    • Software reload
      • DL
      • RTAC
      • JEDI
    • Options
    • Networking
  • Lab Activities
    • PM
    • Load from Cold (LFC)
Day 9
  • System schematics
    • AWS
    • Gantry
    • Generator
  • Troubleshooting
  • Error codes
  • System diagnostics
  • Lab Activities
    • Review system diagrams and communication
    • Troubleshooting
    • System diagnostics
    • Access Error logs
    • Central Listing
      • Test Points
      • LED’s
    • Networking
    • Power Distribution/Supplies
Day 10
  • Course review
  • Course evaluation
  • Final exam
  • To register for a course, fill out the information below or download our registration form.

    For information on travel expenses and hotel accommodations please see our full coverage package information.
  • Course Registration

  • Personal Information

  • Contact Information

  • This field is for validation purposes and should be left unchanged.

Please fill out the form below and we will contact you regarding replacement parts.

Send Me Course Updates

Upcoming Service Training Courses

Register today to secure your seat!

Featured Courses:

Please email registration@rsti-training.com for more info and to register.