OEC Elite CFD & Mini CFD (CMOS Flat Detector) FPD C-Arm
Overview
This course is designed to provide the advanced service professional with the skills and knowledge to maintain the OEC Elite CFD & OEC Mini (CMOS Flat Detector) flat panel detector C-Arm systems. All adjustments will be discussed to establish optimum performance criteria. Theory and hands-on sessions will develop the skills necessary to troubleshoot system failures and restore it to operation. While RSTI may or may not have an OEM Mini CFD training unit during class, students will be able to effectively service the mini following the OEC CFD course due to:
- OEC Mini CFD is a simplified version of the OEC CFD
- OEC Mini CFD & OEC CFD Service key access is the -same
- OEC Mini CFD Service Documentation is downloaded and reviewed
- OEC Mini CFD Component Identification lab reviews the Mini C-Arm and compares against the OEC CFD training unit
- OEC Mini calibration are comparable to the OEC CFD
Prerequisites
To attend this course, the service professional must have good fundamental knowledge and understanding of the principles gained through attendance at our Phase 1, Phase 2, and Phase 3 X-ray courses or equivalent field experience.
Objectives
At the completion of this course participants will be able to:
- Operate the OEC Elite CFD
- Identify all systems, subsystems and components of the OEC Elite CFD
- Verify power supplies for accuracy and function
- Service and calibrate system batteries and charger circuits
- Utilize all communication interfaces to calibrate and evaluate the system
- Evaluate the performance of the X-ray generator, imaging, and workstation sections of each
system - Calibrate and adjust all components of the X-ray generator, imaging chain and workstation
- Restore the system to proper functional state following a system failure
- Evaluate and repair mechanical systems
Tuition: $9995
Course Length: 1 Week
Dates:
- Nov 6-10, 2023
- Jan 22-26, 2024
- Apr 8-12, 2024
- Jun 17-21, 2024
- Aug 26-30, 2024
- Nov 11-15, 2024
Need parts?
RSTI eXchange is your multi-manufacturer, multi-modality solution for diagnostic imaging replacement parts.
Request Parts
Course Outline
- Introduction
- Course objectives
- System
- Major components
- Configurations
- Documentation
- Service Access
- AIAT
- GESAK Service Key levels
- Service key ordering and installation
- System operation
- C-arm controls
- X-ray subsystem
- Collimator and FPD controls
- Mechanical systems
- Workstation controls
- C-arm controls
- Physical layout and component identification
- Workstation
- 2K Monitor & 4K Monitor
- EBox Computer
- Workstation PION
- Power PION
- C-Arm
- Workstation
- AC power distribution
- DC power distribution
-
- Batteries and charger
- Lab Activities
- System operation
- Fluoroscopic modes
- Low dose
- High dose
- Boost
- Radiographic mode
- Patient data input
- Recall stored images
- Collimator controls
- FPD
- Fluoroscopic modes
- Physical layout and component
ID- Covers and panels
- Power supplies
- Circuit boards
- Battery removal
- X-Ray tube removal and installation
- FPD removal and replacement
- Mechanical systems
- Power supply verifications
- Battery charger calibration
- Battery charger test points and waveforms
- System communications
- Interlocks
- SUI (Service User Interface)
- Service Key access
- Required Tools & Test Equipment
- X-ray generator
- Stator power and control
- Pre-charge
- X-ray on, x-ray disable
- High voltage control
- Filament/ mA control
- Lab Activities
-
- Verify communication busses
- Initialize calibration mode
- Calibration screens
- Calibration process
- Verify stator operation
- Pre-charge test
- Verify x-ray enable signals
- Calibrate x-ray generator
- High voltage test points and waveforms
- Filament/mA control test points and waveforms
- Max “R” adjustment
- FPD Calibration
- Imaging system components
- X-ray tube
- Central ray adjustment
- Filtration
- Image/Fluoro functions control
PCB’s- Collimator control
- Collimator iris size and
center - Semi-transparent leafs
- Width
- Rotation
- Collimator iris size and
- Collimator control
- X-ray tube
- FPD
- Thermoelectric cooling
- Dose/ brightness control
- Video path
- Brightness control processing
- Iris adjustment
- Lab Activities
- Central ray adjustment
- Collimator centering
- Collimator size tracking calibration
- FPD Beam Alignment
- FPD Dose
- Image display
- Image processor
- Image manipulation
- Window/level
- Subtraction
- Noise suppression
- Motion artifact suppression
- Image manipulation
- Video distribution board
- Video input
- High resolution video output
- Standard resolution video
output
- Monitors
- Touch screen
- Image processor
- Image storage
- Single disk
- Mechanical systems
- Flip flop
-
- Orbital motion
- Wig-wag motion
- Horizontal cross arm motion
- L-Arm
- Vertical lift
- Steering and breaking
- Motion Calibrations
- PM
- PM Procedure
- PM Activities
- Lab Activities
- Monitor adjustments
- Image centering
- Vertical lift drive tests
- Wig-wag adjustment
- Mechanical evaluation
- Motion Calibrations
- PM
- Troubleshooting
- System Diagrams
- Error messages
- LED displays
- Seven segment displays
- Status monitor
- Status/error logs
- System Software
- Backup/Restore
- Lab Activities
- Evaluate for diagnosis
-
-
- LED functions
- Bar graphs
- Seven segment displays
- Use service mode to verify system operation
- View status logs
- View error logs
- Reload system software
- System troubleshooting
- System review
- Course evaluation
-