Course Outline

Siemens Ysio

Overview

The Siemens Ysio training course covers Siemens latest DR (Digital Radiography) system. The Ysio course is a skills development course designed to provide the experienced service professional with the skills necessary to fully service and calibrate these single & dual detector systems. The Ysio product is built on the Polydoros R80 generator platform. System components that will be covered in this course include:

  • Multix (Height Adjustable Table)
  • 3D (Ceiling Suspension)
  • BWS (Bucky WallStand)
  • Polydoros R80 (Generator, 80kW)
  • Flourospot Compact (Image System = Host Computer)

Prerequisites

To attend this course, the service professional must have a good understanding of the principles gained
through attending Phase II or two years equivalent experience in servicing RAD equipment.

Objectives

  • Understand the similarities & difference between the Ysio products.
  • Describe how factors are optimized to produce the highest quality digital images
  • Describe the function of the basic components of each Ysio digital radiographic unit
  • Demonstrate an understanding of the installation procedures associated with the Ysio
  • Perform the necessary digital performance monitoring and quality assurance procedures
  • Perform all system calibrations and adjustments to maintain the highest quality images
  • Evaluate circuit functions to facilitate troubleshooting
  • Perform a complete and thorough preventive maintenance inspection on the unit

Tuition: $7995

Course Length: 1 Week

Dates:

  • Jul 22-26, 2024
  • Aug 26-30, 2024
Register Course Schedule   Course Outline  
Need parts?

RSTI eXchange is your multi-manufacturer, multi-modality solution for diagnostic imaging replacement parts.
Request Parts

Course Outline

Day 1
  • Digital imaging process overview
  • Basic terminology
  • Ysio system overview
    • SYNGO PC interface
    • FPD’s
      • Fluoro: Pixium 5100
        • Trixell Pixium 4343R
          Rad/Wireless: Pixium 5500 wi-D
          Trixel Pixium 3543
  • Ysio system operation
  • System specifications
  • Lab Activities
    • Basic system operation
    • 3D coordinate system
    • Syngo Workstation software
      • Image acquisition
      • Image viewer
      • Screen considerations
      • Technologist digital QC
  •  System documentation overview
  • Operations
    • Syngo Workstation
  • Service
  • Schematics
  • Lab Activities
    • Image quality
    • Signal to noise
    • Resolution
    • Contrast ratio
    • MTF
    • Flatfield/phantom IQ
    • AEC
Day 2
  • System service
    • Service software
    • Service access
  • Lab Activities:
    • Required tools and software
      Remove and replace covers and system panels
    • AWS
    • Operators console
    • Generator
  • SYNGO basics
  • AWS configuration
  • Site planning and installation
  • Network configuration
  • Ethernet config
    • CAN Network
    • Troubleshooting internal networks
  • System calibration
    • Tube Adjustment
    • Inverter Adjustment
    • mAs Adjustment
    • Dose Adjustment (Iontomat)
    • FD Calibration
    • kV (Voltage response)
    • Functional checks
    • System backups
    • System restore
    • Lab Activities
      • Component location
      • Schematic location
      • Physical location
      • Connector locations
      • Fuse location/identification
Day 3
  • Preventive maintenance
  • Error codes
  • System diagnostics
  • Lab Activities
    • PM
      • OEM Preventative
        Maintenance Procedures
    • Diagnostics
  • Image Chain – Image Detection
  • Detector Calibration
    • FD calibration
  • System service procedures
    • Software reload
    • System ghosting
    • Troubleshooting
    • Options
    • Networking
    • Output device
      • PACS
      • Workstations
      • Media
      • Printers
    • Input devices
      • Modality worklist
  • Lab Activities
    • Software Load
      • OS
      • Applications
    • Configure and test output devices
      Configure and test input devices
    • Backup/Restore
    • Ghosting/Cloning procedures
Day 4
  • Generator calibration
  • Position calibration
  • Lab Activities
    • Iontomat Dose (AEC) calibration
  • QA
    • IQAP
    • X-Ray Field
  • Stand adjustment
Day 5
  • System diagrams
    • AWS
    • Gantry
    • Generator
  • Troubleshooting
  • System diagnostics
    • Hardware Test
    • Stand Test
    • AXCS Test
  • Lab Activities
    • Review system diagrams and communication
    • Troubleshooting
    • System diagnostics
    • Access Error logs
    • Networking
      Power
    • Distribution/Supplies
  • Course review
  • Course evaluation
  • Final exam
  • To register for a course, fill out the information below or download our registration form.

    For information on travel expenses and hotel accommodations please see our full coverage package information.
  • Course Registration

  • Personal Information

  • Contact Information

  • This field is for validation purposes and should be left unchanged.

Please fill out the form below and we will contact you regarding replacement parts.

  • This field is for validation purposes and should be left unchanged.
Send Me Course Updates
  • This field is for validation purposes and should be left unchanged.